SMP-MVxx Frame Specification
Dimensions
Size: 440(W) x 44(H) x 516(D) mm Size: 483(W) x 44(H) x 516(D) mm with rack mount brackets Weight: 8 kg (two PSUs)
Cooling Fans
5 fans each 40x40x20mm nominal 6-12V operating range. 10.8CFM 27.5dBA 0.092A 1.11W Sunon Vapo-Bearing technology
Communication
GPIO: High-density 44-way D-type. Assignable 32xGPIO Inputs, 8xGPIO Outputs.
Ethernet: RJ45 LAN: 100BASE-T
Audio:1 x 3.5mm stereo audio jack
RS422 & RS485:1 x RJ45
ENVIRONMENTAL
Temperature:0°C to 40°C
Humidity: 30% to 90% (no condensation)
AC/DC Power Module: (90VAC ~ 264VAC), 50/60 Hz Safety Compliance: CB, CE, CCC, cUL, UL, TÜV
Max. Power Consumption: 151.7W at 200-240VAC, 50Hz, 0.68A
Compliance:EMC – Emissions EU: EN55103-1 USA: FCCR 47 CFR: 2009, Part 15, Sub-part B (Class A) EMC – Immunity EU: EN55103-2. Safety EN: EN60950-1 USA: Tested to UL1419 (3rd Edition) Hazardous Material UK: RoHS-6 – Complies with EU Directiv
SMP-MVxx SDI Inputs
Video Inputs
SMP-MVxx: up to 48xSD/HD/FHD with maximum resolution of FHD50/59/60. SMP-MVxx-12: up to 48xSD/HD/FHD/UHD with maximum resolution of UHD50/59/60.
Input Formats
SMP-MVxx: SD-SDI: SMPTE259M, 125M: 525/60i, 625/50i YCbCr 4:2:2
1.5G-3G-SDI: SMPTE292M, 424M, 274M: 1920x1080 10-bit YCbCr 4:2:2 /60P/59.94P/50P/60i/59.94i/50i/30P/29.97P/25P/24P/23.98P
SMP-MVxx-12: As above plus: 6G-12G-SDI: SMPTE2081-10, 2082-10, 2036-1: 3840x2160 10-bit YCbCr 4:2:2 /60P/59.94P/50P/30P/29.97P/25P/24P/23.98P, 12G-SDI (SMPTE ST2082 12Gbit/s
Cable Length
Using Belden 1694A: SD-SDI >350m, HD-SDI >150m, 3G-SDI >120m, 12G-SDI >50m
SDI SMPTE Return Loss
Return Loss lower than -15dB up to 1.5GHz and -10dB up to 3GHz. -7dB up to 6GHz and –4dB up to 12GHz
SDI Embedded Audio
SD-SDI SMPTE-274M-A, HD & 3G SDI SMPTE 299M
SDI Connector
Dual HD-BNC 75ohm
SMP-MVxx SDI/HDMI Screen Outputs
SDI Screen Outputs
In 2K mode up to 8 x FHD50/59/60.
In 4K mode up to 2 x UHD50/59/60.
HDMI Screen Outputs
All modes output format HDMI 1.4 In 2K mode up to 4 x FHD50/59/60 RGB 4:4:4 simultaneous with SDI outputs. In 4K mode up to 2 x UHD50/59/60 YCbCr 4:2:0 simultaneous with SDI outputs
SDI Output Formats
3G-SDI: SMPTE424M, 274M: 1920x1080 10-bit YCbCr 4:2:2 /60P/59.94P/50P 6G- 12G-SDI: SMPTE2081-10, 2082-10, 2036-1: 3840x2160 10-bit YCbCr 4:2:2 /60P/59.94P/50P/30P/29.97P/25P
Cable Length
Using Belden 1694A: SD-SDI >350m, HD-SDI >150m, 3G-SDI >120m
SDI Embedded Audio
SD-SDI SMPTE-274M-A, HD & 3G SDI SMPTE 299M
SDI Connector
Dual HD-BNC 75ohm
SMP-MVxx Features
Audio meters (video pips)
Each video pip can have its own audio meters with left/right or split meters All pairs of embedded audio can be displayed.
Audio meters (audio pips)
Audio pips can be configured up to a maximum of 512 (including video pips) with audio sources derived from the video inputs.
Embedded Audio on Outputs
SDI or HDMI outputs can be individually configured to include up to 4 pairs of embedded audio from any of the inputs.
Audio Monitoring Out
SMP/SMP2 frames only: 1 Pair of embedded audio from any input can be monitored on an 3.5mm stereo analogue line level output.
Alarms
Video Loss, Video Freeze, Video Black, Over/Under, Audio Carrier Loss, Audio Silence, Audio Over/Under threshold, Audio Phase Error, Audio mono, Source Metadata (EIA-608 encapsulated in EIA-708. CC, WST, OP-47, D-VITC, ATC loss and CRC errors). Zone based monitoring inside the pip to detect video freeze and Black. Audio loudness out of range
Alarm Outputs
Hard and Soft Alarm outputs Soft Outputs via LAN and/or SNMP
Tallies
Hard Tally (via GPIO up to a maximum of 32). Soft Tally (TSL v5.0 protocol over ethernet) with 2 tallies per tile.
Under monitor displays
Under Monitor Display (UMD) information may be generated from remote sources via the LAN operating on a remote PC or serial using TSL/Open protocols. Maximum UMD length 150 characters.
Clocks/Dates
Analogue and Digital Clocks with foreground and background colours. Date can be displayed with clocks. Clock/date display data can be derived from several sources; the system clock, NTP synchronisation, LTC, or VITC from a chosen SDI input. Time-zone and offset settings.
Timers
Programable Countdown Colour, Transition Colour and Destination Colour. Countdown timer may be setup to start at a certain time of the day or controlled by GPIO Inputs. Timer modes for single and dual GPIO inputs supporting Pause, Resume and Reset.
Battery Backup
A non-rechargeable battery ensures the time and date settings are retained if power is lost or the unit is powered down.
Genlock reference
BB/Tri-level sync nominal 1V pk-pk HD-BNC 75Ω
Time reference
LTC input or NTP (network protocol) Nominal 1V pk-pk HD-BNC High-Pass 47uF/1K ohm.
Subtitles
WST on SD-SDI or OP-47 on HD-SD
Aspect Ratio
Automatic adjustment using AFD decoding
Timecode
D-VITC and Ancillary TC SD/HD-SDI
Idents
Idents, text boxes and any TrueType fonts. Any true-type font (ttf) can be installed to allow Unicode characters to be displayed correctly.
User Logo
PNG format with storage capacity up to 50MByte
SMP-MVxx Video Processing
Input Format detection
Automatic signal detection of input forma
Video processing bit-depth
Internal bit depths and data paths are minimum 10-bit.
Video processing delay
Processing delay varies between 1 and 2 frames depending on the timing relationship between the video input and video output
Multiple source scaling
Sources can be routed to any output with arbitrary scaling and location with the proviso that the number of unique video pips does not exceed the number of inputs.
High Dynamic Range
HLG, PQ and S-Log3 HDR formats supported. BT2100 up-mapping/down-mapping
Maximum pips
A maximum of 512 unique tiles can be configured per output. The maximum number of video pips is limited to the number of video sources.
Specifications are subject to change without prior notification
© Chromatec 2025 All Rights Reserved
We need your consent to load the translations
We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.